top of page

​

Insulated Panel Systems & Temperature-Controlled Areas

new build.png
Welcome

Frosty Build is a specialist contractor for the supply and installation of insulated panel systems and temperature-controlled areas. The majority of our work is delivered as a trade partner — in fact, around 95% of our annual work comes through established cold storage and panel businesses, supporting projects under principal contractors, builders, and refrigeration contractors.
 

We’re set up to strengthen your delivery capability, not compete with it. When engaged through a cold storage company, panel supplier, or refrigeration contractor, we operate as an extension of your team — installing to issued documentation, maintaining finishing standards, and coordinating closely to keep the program moving.

We also work directly with builders where required, delivering a clear, well-coordinated installation scope that integrates with refrigeration, HVAC, electrical, and fire services.

Who We Work With

​

  • Cold storage companies & specialist contractors

  • Panel manufacturers & suppliers

  • Refrigeration & mechanical contractors

  • Principal contractors / builders

  • Facilities & operations teams (as directed by the project team)

Who we work with
PXL_20251201_085239805.jpg
arctic.jpg

​


 

  • Insulated panel walls, ceilings, and partitions

  • Façade walls and insulated panel cladding (external)

  • Doors and openings — full installation from building frames through to installing and fitting doors (as specified)

  • Glass inserts / vision panels — supply/installation where included, including cut-outs, framing/interface detailing, and sealing (as specified)

  • Hygienic splash walls and cleanable detailing

  • Ceiling suspension systems — full suspension supply/installation (where included)

  • Structural support steel installation (where included) — posts, frames, lintels, and support members required for panel and door interfaces, installed to issued details

  • Warehouse storage racking installation (pallet racking) (where included) — installed to manufacturer requirements and project documentation

  • Critical detailing: junctions, penetrations, trims, flashings, and sealing

  • Underfloor insulation systems (as specified)

  • Underfloor heating preparation / installation support (where included in scope and specified)

  • Coordination-ready interfaces with refrigeration, HVAC, electrical, and fire services (by others)

Full package installation (panel works): We can take responsibility for the complete panel works package — set-out, suspension systems (where included), walls, ceilings, door framing and door installation, trims, sealants, and close-out — delivered to the builder’s program and coordinated around project interfaces.

What we install

Underfloor insulation & Heater Cables
What We Install
PXL_20250519_072342720.MP.jpg

Pricing & Engagement Options

We’re flexible to suit how your project is structured:

  • Quoted scope (fixed price based on drawings / take-off / scope)

  • Hourly / day-rate labour (for support crews, shutdowns, or variable scope works)

  • Fixed rates set by the contractor (working to agreed productivity and site expectations)

We understand how the industry works and the importance of protecting client relationships.

  • We support your scope and standards on-site and maintain a professional, project-first approach

  • We install to issued drawings/specs and agreed scope boundaries

  • We coordinate with other trades to keep progress clean, predictable, and on program

  • When representing a trade client on-site, we can present as part of your team — including wearing your company shirts/branding where required and appropriate

How We Protect Trade Relationships

Bidfood_storage_refined_bright.jpg

Cold Storage

Cold storage projects often involve large floor areas, high traffic, and strict temperature performance requirements. We install panel wall and ceiling systems with a strong focus on sealing, interfaces, and staged delivery to support efficient commissioning and handover.

  • Wall/ceiling installation to specified thermal performance

  • Sealing and detailing to minimise air leaks and refrigeration load

  • Interfaces for racking zones, traffic areas, and high-cycle openings

  • Coordination around penetrations and services routes to maintain performance

Cold Storage
Cool Room
fleetwood.jpg

Cool Room

Cool rooms are typically built around workflow, hygiene, and consistent temperature control. We install insulated panel systems with clean junctions, practical detailing, and door interfaces suited to daily operation and maintenance requirements.

  • Panel installation aligned to required temperature range and duty cycle

  • Clean, sealed junctions and easy-clean detailing

  • Door installation to suit clear openings, traffic flow, and sealing performance

  • Practical finishing for wash-down zones and maintenance access

PXL_20240815_072350600.jpg

Freezer Room

Freezer rooms operate in demanding conditions where sealing, vapour control, and durability are critical. We install freezer systems with attention to junction detailing, thresholds, penetrations, and interfaces that help minimise condensation and long-term maintenance issues.

  • Sealed detailing to limit moisture ingress and condensation risk

  • Reduced thermal bridging at junctions, penetrations, and thresholds

  • Door and threshold interfaces installed to maintain seal integrity

  • Robust finishes suitable for loading and picking environments

Freezer room
Clean room
clean_edited.jpg

Clean Rooms & Lab

Clean rooms and lab areas require controlled, cleanable finishes and careful interface management. We install panel systems with smooth surfaces, sealed junctions, and disciplined penetration close-outs to support hygiene and compliance requirements.

  • Smooth, cleanable finishes with sealed junctions and minimal dirt traps

  • Penetration management to maintain performance and cleanliness

  • Installation aligned to hygiene and compliance requirements (as specified)

  • Coordination with mechanical/electrical trades for clean close-outs

Food proccessing
PXL_20241210_083659087.jpg

Food Processing 

Food processing areas rely on cleanable construction, reliable temperature zoning, and efficient workflows. We install panel systems with practical detailing, sealed junctions, and coordinated interfaces to support production requirements and staged handovers.

  • Panel systems installed to support temperature zoning (as specified)

  • Wash-down appropriate detailing with sealed junctions and penetrations

  • Interfaces for conveyors, equipment zones, and service routes

  • Program-driven staging for live sites and sequenced handovers

Abattoir
PXL_20231205_235636280.jpg

Abattoir

Abattoir environments require heavy-duty construction and reliable wash-down performance. We install insulated panel walls and ceilings with moisture-resilient detailing and hygienic junctions suited to high-traffic processing areas and strict sanitation requirements.

  • Wash-down capable wall/ceiling installation with moisture-resilient detailing

  • Hygienic junctions to support sanitation and compliance outcomes

  • Durable finishes for high-traffic operational zones

  • Temperature zoning construction (as documented) across processing/storage areas

plant room.jpg

Plant Room

Plant rooms must be built for durability, access, and ongoing servicing of mechanical equipment. We install insulated panel systems and interfaces suited to plant environments, with coordination around ventilation, services routing, and maintenance clearances.

  • Durable insulated panel installation suited to plant environments

  • Coordination for ventilation openings, services routes, and equipment interfaces

  • Access and maintenance considerations aligned to documentation

  • Practical detailing for long-term reliability and servicing

Plant Room
Transportable
PXL_20230426_224718587_edited.jpg

Transportables

Transportable builds require tight tolerances, strong structural interfaces, and finishing that holds up through lifting, transport, and re-installation. We install insulated panel systems for transportable cool rooms, freezers, plant enclosures, and modular rooms—built on skids or fixed to a structural base—with a focus on durability, sealing, and transport-ready detailing.

  • Panel walls, ceilings, and partitions installed to suit modular layouts and transport limitations

  • Skid-mounted builds: interfaces and fixing methods suited to movement, lifting points, and vibration loads

  • Off-skid builds: installation aligned to structural bases/frames with clean floor and threshold interfaces

  • Door framing and door installation completed for transport-ready fit-off (as specified)

  • Sealing, trims, flashings, and close-outs completed to suit repeated handling and site connections

  • Smooth, cleanable finishes with sealed junctions and minimal dirt traps

  • Penetration management to maintain performance and cleanliness

  • Installation aligned to hygiene and compliance requirements (as specified)

  • Coordination with mechanical/electrical trades for clean close-outs

Why Clients Engage Frosty Build

  • Trade-partner delivery: we integrate into existing project teams and scope structures

  • Panel system experience: EPS, PIR, XFLAM, Volcore (as specified)

  • Finish and detailing: straight lines, clean junctions, sealed penetrations, consistent results

  • Program-focused: staged installs and predictable delivery aligned to site sequencing

  • Transparent pricing: clear scope breakdowns so everyone knows what’s included

  • Support after install: maintenance/service options where required

bottom of page